Why is the washer equipped with an oil seal?
This component prevents water from entering the bearings from the drum cavity. It takes considerable ability and understanding in the area of automatic machine construction to perform an element's diagnosis and, if necessary, its replacement, which are labor-intensive processes. You can install the gland yourself, but you must first carefully read the handbook to understand the steps involved and the primary issue with tearing apart the machine.
This component serves as a sort of seal between the drum and the shaft, and its importance cannot be overstated. Thanks to the oil seal, liquid cannot enter the washer shaft or bearings. The component, a rubber ring with a specific diameter, appears to be relatively straightforward.
When manufacturing automatic machines, washer equipment manufacturers use oil seals of various diameters; the diameter of the ring depends on the particular model of the washer and the features of the unit tank's design. In order to determine the type of oil seal you need for installation, it is advised to disassemble the machine and remove it from the case before purchasing the item.
In what way should the seal be lubricated?
Due to its position in the system and its function, the stuffing box is continually exposed to friction and the effects of temperature changes. The rubber may develop fractures during a protracted operation, which will surely result in the part's loss of functionality. This effect is detrimental to the sealant. Because of this, it is important to lubricate the oil seal's surface and preserve it as soon as possible. The life of the element will be greatly extended by routine use of specific greases.
How should the ring be greased?
Be sure to carefully examine the composition's properties while selecting it. Grease of a high caliber must adhere to specified standards.
withstand dampness. It needs to have organic particles with a water-repellent property.
They have a high heat tolerance. During the friction process, the side of the seal closest to the drum will overheat, so it is crucial that the lubricant doesn't lose its qualities after heating.
Do not contain any aggressive substances, such as chlorine or other substances that could ruin the ring's surface.
thick in consistency. This is required for a thick covering of sealant rubber on the gland bush. You can machine bearings as well.
