NNk Stainless Steel/Lron/Brass/Copper Water Plug

Home / Products / Freeze Plug & Washer / Freeze Plug/Water Plug
  • 36mm NNK Freeze Plug for BMW - iron/ brass/Steel Expansion Plug 11111717939

  • 36mm NNK Freeze Plug for BMW - iron/ brass/Steel Expansion Plug 11111717939

  • 36mm NNK Freeze Plug iron/ brass/Steel Plug

  • 36mm NNK Freeze Plug iron/ brass/Steel Plug

NNk Stainless Steel/Lron/Brass/Copper Water Plug

The material of the water plug can be divided into pure copper water plug, stainless steel water plug, and iron water plug.
Water plug can also be called core plug/like bowl water plug / engine cap/cylinder cap/water stopper/Water Plug/water blockwater /water blocker/water stopper
Attribute

Material:

NBR

Product Description

52mm Stainless Steel copper Dish type core / Freeze plug/engine cap

Product Introduction:

The engine water plug is to prevent the engine from freezing and breaking the body. When the inside of the engine freezes, the water plug will be opened to protect the engine.
On the one hand, because the original engine cooling medium is mostly water, antifreeze is rarely used. In winter, if there is no garage storage, drain the water and add it the next day. If you forget to release the water once, the water will freeze and expand, and the engine plug is likely to freeze. So a water plug was designed.
On the other hand, because the engine plug is cast, the cast sand mold is very troublesome to arrange such a complex single piece of the cylinder plug. In order to facilitate casting, there will be holes in some places. These holes should not exist when the engine is actually working, so the process holes are designed to be blocked. Of course, some may also be done for the convenience of later machining.

The material of the water plug can be divided into pure copper water plug, stainless steel water plug, and iron water plug. The material and thickness of the water plug can be customized. The thickness determines the sealing performance. Generally speaking, the thicker the side of the water plug, the better the sealing performance.

36mm NNK Freeze Plug for BMW - iron/ brass/Steel Expansion Plug 11111717939

36mm NNK Freeze Plug for BMW - iron/ brass/Steel Expansion Plug 11111717939

Product details :

Size:36mm

Material:brass, stainless steel, iron

Mounting Location: Freeze plugs may be located on the side, back, or underside of the engine block.

Packing : plastic bag

OEM Any size NNK Water plug/freeze plug

 

Product Type

OEM Any size NNK Water plug/freeze plugOEM Any size NNK Water plug/freeze plug

Freeze plugs not only help prevent cracks in the internal engine, but they also reduce the chance of coolant starting to leak. It is a very troublesome problem that the engine block is frozen. If there are leaks and overflows, the problem will be even more serious. Therefore, the effect of freezing plug cannot be ignored. So you need a good freezer plug.

When your freezer plug is rusted or has other problems and can no longer be used, please replace the NNK freezer plug accessories in time. Prevent engine block loss.

OEM Any size NNK Water plug/freeze plug

Our NNK has rich experience in the research and production of freezing plugs. We have their own matching freezing plugs according to your model and structure to ensure the quality. Protect your engine block.

freeze plug Common models
10MM 24MM 36MM
12MM 25MM 38MM
13MM 26MM 39MM
14MM 28MM 40MM
16MM 29MM 42MM
18MM 30MM 45MM
19MM 31MM 50MM
20MM 32MM 55MM
21MM 33MM 58MM
22MM 34MM 56MM
23MM 35MM 60MM

 

36mm NNK Freeze Plug iron/ brass/Steel Plug

How to replace the engine water plug?

1. Before replacing the engine water plug, it is necessary to drain the water, then remove the air filter and intake pipe, then remove the supercharger and generator, and remove the heating pipe to see the water plug.

2. The engine water plug is a round cup-shaped metal plug that can be replaced. When removing the water plug, knock down one side of the water plug. After knocking the other side up, use pliers to remove it, and then install a new water plug.

 

Basic information:

1. Some small water plugging holes are the processing channels during the mechanical processing, which are plugged  with waterafter the processing is completed;

2. Some large water plug holes are designed to protect the engine block or cylinder head. In winter, the engine that adds water forgets to release water, and the water plug will expand out after water freezes, so as to protect the engine block or cylinder head to some extent.

3.water stopper/Water Plug/water blockwater /water blocker/water stopper/core plug/like bowl water plug / engine cap/cylinder cap

36mm NNK Freeze Plug iron/ brass/Steel Plug

Approaching NOK-CN factory

1、Fatory Staff

Fatory staff of more than 150 people

2、Own Production

Our own production of oil seal skeleton

3、Quality Teating

Quality through quality teating

4、Fast Delivery

Fast delivery, reliable quality

5、Floor Area

Area: 13320m2 Comple industrial chain

6、Packing line

Integrated Process of strength factory

Water plug can also be called core plug/like bowl water plug / engine cap/cylinder cap/water stopper/Water Plug/water blockwater /water blocker/water stopper

52mm Stainless Steel copper Dish type core / Freeze plug/engine cap

core plug,freeze plug tool,frost plug,welch plugs,engine freeze plug,freeze plug installation tool,freeze plug installation,engine core plugs,brass freeze plugs

FAQ

Q1.What are the advantages of your company?

A: NNK is a brand belong to NOK-CN factory.We have Impressive Professional Technology,Experienced Technical Staffs, Strict Inspection Procedures,High Quality and Afforable Prices On-Time Delivery,Problems identification & Solutions offers. Seal Design

Proposal offers. Seals Tests for Endurance and Performance,PPAP Level IIl Submission. Strick Process Control,International Standard Criterias.

Q2. What is your terms of payment?

A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.

Q3. What is your terms of delivery?

A: EXW, FOB, CFR, CIF.

Q4. How about your delivery time?

A: Existing molds: 30 days, depending on ordering quantity.

New Molds: 60 days, depending on ordering quantity.

Samples Submission: 21-28 days with existing toolings.

Q5. Can you produce according to the samples?

A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q6. Do you test all your goods before delivery?

A: Yes, we have 100% test before delivery

Q7: How do you make our business long-term and good relationship?

A: 1. We keep good quality and competitive price to ensure our customers benefit;

2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.

View More

Related Products
  • wechat

    Mr ken (sales manager): +86 156 0767 8250

Chat with Us