Valve Guide Seal 8-94396609-2 For ISUZU

Valve Guide Seal 8-94396609-2 For ISUZU.  If you need  isuzu engine valve oil seal, Valve Seal Motor Engine Valve Oil Seal.please contact NOK CN FACTORY.valve guide seal , replacing valve guide seals.

If you need a quotation or valve seals for other car series, click here to contact us

Valve Guide Seal is a component used in the automobile industry, which is designed to solve a common problem in engines; that is, when engine oil is mixed with air and circulates through the engine. This can lead to the buildup of carbon deposits in the valve guides, which can affect the performance of the engine. The Valve Guide Seal is designed to prevent the mixing of these two fluids, thereby eliminating this problem.

Valve Guide Seals have an important role to play, as they can also be used to reduce engine noise and vibration, due to the reduction of air that is allowed to leak into the engine. Additionally, Valve Guide Seal has a better heat dispersion quality than some other seals, meaning that it can more effectively cool the engine, which can help with improved performance.

Valve guide seals are typically made from rubber, plastic, graphite, or PTFE. Rubber is the most common material because it is the most cost-effective, but graphite and PTFE offer better resistance to higher temperatures. Valve guide seals are designed to be strong and durable, but they must also be able to handle extreme temperatures that the engine will generate during operation. Over time, these seals will wear out and need to be replaced. If you need Valve Guide Seal 8-94396609-2 For ISUZU.Please contact NOK CN FACTORY.

Valve Guide Seal 8-94396609-2 For ISUZU

Product Identifiers

Valve guide seals are important for two basic reasons: to keep the combustion chamber gas-tight, and to prevent excessive oil consumption. If an engine is not sealed properly, air can leak from the valves and into the combustion chamber, which can cause pre-ignition and an undesirable increase in engine temperature. Oil consumption can occur if the seal deteriorates, and air can enter the engine at other points.

Replacing valve guide seals is important for more than just performance. When seals become leaky, it can lead to increased oil consumption, increased exhaust emissions, and increased exhaust noise. Replacing the seals will ensure that the engine is running smoothly and that emission levels are within accepted standards.

Valve guide seals are a critical component of any engine, and keeping them maintained is essential to the performance and long-term reliability of the engine. It’s important to keep them in good condition and replace them when they start to wear out. Doing so can help prevent expensive repairs and ensure that you’re getting the most out of your engine.

Valve stem seals are made from a variety of materials, including nylon, PTFE rubber, steel, and synthetic rubber. Sometimes these materials are combined into a single sophisticated design. When synthetic rubber is used, there are three basic types: nitrile, polyacrylate, and Viton.

Valve Guide Seal 8-94396609-2 For ISUZU

Non-integrated seal: fulfills the function of oil metering

Integrated seal: additionally incorporates a spring seat to prevent wear on the cylinder head
The optional low friction design features of SKF's high pressure valve stem seals can be incorporated into all available seal designs without any changes to existing installation equipment. Our new rubber material can even withstand the most aggressive oils in the market.

NNK is a brand of NOK-CN factory. Standard seals are developed or used according to specific customer requirements. All products use professional technology to ensure maximum sealing performance while reducing friction. NNK stem oil seal has excellent chemical resistance and temperature resistance . Consistent oil metering and long service life for optimal valve lubrication and minimal engine emissions.

Valve oil seal model：

When installing Valve Guide Seal, the area must be completely clean and free of dirt and debris. This is to ensure that the seal fits correctly and is able to be properly secured. It is then installed onto the head of the head guide and the surface of the engine cylinder head. Once the seal is in place, the securing bolts must be tightened to achieve the correct torque settings.

After the seal is installed, the engine must be run to check that it is properly tightly secured. If the seal is not properly secured, then it must be replaced. As with most auto components, it is important that the right seals are used, in order to ensure that the engine performs at its best.

NNK Valve Stem Seal Service Introduction

Located in China since 1983, NNK SEALING PARTS CO., LTD. is a Valve Stem Seal supplier and manufacturer with more than 40 years of experence in the Seal Industry.

With more than 40 years experience, NNK is specialized in leading seal and oil seal manufacture. From oil seals, O-rings, to gaskets, and customized products, application industries include manufacturing, chemical processing, defense, water treatment and filtration, hydraulics, fluid power, heavy trucks, automobiles, aerospace, oil and gas, medical and For life sciences, food and beverages, a complete product line is available for customer needs and specifications.

FAQ

1.Why more and more customers choose us?
a. We are specialized in the manufacturing and exporting of high quality seals. Choose us is to choose the rest assured.
b.We mainly produces various types, specifications, models of the seals of high precision mechanical components. We have all the specifications of what you need to help you achieve one-stop shopping, save time, effort and worry.
c.We has long been a domestic and international numerous oil seal mould supply business of manufacturer, service for 15 years, we have professional talents and product research and development equipment, our research and development ability, is the domestic first-class oil seal manufacturer home.
d. We provide one-stop sealing solutions, and provide a full range of services, from product design, mold development, stamping skeleton, vulcanization molding, clip, screening and packaging,. The entire process would take a shorter, more stable quality.
2. What is your packing?
a. Paper roller: 10pcs in one roller, 200 rollers in one carton
b. PP bag: 50 or 100pcs in one bag,15 or 30 bags in one carton
c. Box: 1pc to a box
d. According to customer's request.
3.Date of Delivery
a. 1-2 days if goods in stock.
b. 10-15 days if goods out of stock with molding.
c. 25-30 days if goods out of stock without molding.
4.Payment Term:
a. 30% T/T in advance and 70% balance paid before shipment.
b. West union/ Money Gram
c. Paypal
d. others for discussion
5. Can you produce according to the samples?
a. We accept ODM and OEM at the same time.We have the ability to provide the sample of the products of decomposition, develop the mould, for production.
6. How do you make our business long-term and good relationship?
a. We will continue to improve the process control, and improve the quality of our products and work to reduce operating costs and provide a competitive price for customers, to ensure that customers benefit
b. We seriously treat every customer, in good faith with them to do business, make friends, no matter how much volume, we will provide