Material:
NBRBrand:
NNK CustomPackage:
Plastic bag & carton box or according to your requProduct Description
35*48*6.5 HTC NBR/FKM oil seal BH4367E / 9031135023 For car seal
Brand : NNK
Type : TC Oil Seal
Size :35*48*6.5
lip : Double lips and single lip are available
Seal Material :NBR, FKM, FPM, Silicone, EPDM material
Origin :China
Hardness :70-75 Shore
Color :Black,brown
Transport Package :PP Bag/Carton NOK-CN Factory
The TC profile is an anti-pollution shaft seal made up of a single metal cage with a rubber coating, a main sealing lip with an integrated spring, and a second sealing lip.For the retention or exclusion of fluids on rotating shafts in a variety of applications, rotary shaft lip seals are frequently utilized.
Most industries employ oil seals primarily to keep grease in a particular case or housing. These are efficient ways to fill a gap between stationary and moving parts of various machines and mechanical devices. This kind of barrier effectively shields machinery from dangerous impurities and dirt while preventing lubricant escape.
These dynamic seals are the most widely used for low pressure lubricants and high speed rotating shafts. When a bearing is used to support a rotating shaft, oil seals are utilized to keep lubricating fluids in the system and to keep contaminants out. Rubber elastomer that is attached to a metal case or container and helps maintain the lip against the shaft utilizing its garter spring gives these durability.These are often put next to a bearing that seals various gases, liquids, or solids that a particular mechanism encounters in or out. Oil seals are also available in split types for simple installation and effective downtime reduction by preventing machinery disassembly. These come in single or double lip varieties and are suggested for horizontal shafts.
The TC Oil Seal is a garter spring-equipped dual-lip radial seal that operates at low pressure to defend against impurities. The OD's ability to seal is enhanced by the rubber coating. The steel case's inside face is partially coated in rubber. The secondary sealing lip is shielded from contamination and dust by the additional dust lip. You can use this seal in contaminated settings. An appropriate lubricant should be used between the two sealing lips in order to maximize performance over the seal's lifetime.
In mechanical equipment, oil seals, also known as grease, fluid, or dirt seals, seal gaps between fixed and moving parts to assist stop lubricant evaporation. Additionally, they prevent dangerous impurities from entering machinery, especially in harsh conditions. Oil seals are essential parts of almost every sort of operating machine or vehicle and guard all varieties of carefully designed, snugly fitting ball, sleeve, and roller bearings. NOK-CN Factory
NNK TC Oil Seal Advantages :
excellent static sealing
extremely effective thermal expansion compensation
Greater roughness in the housing is permitted Lower risk of rusting
Low- and high-viscosity fluid sealing
Currently used primary sealing lips have minimal radial forces.
protection from unwelcome airborne pollutants
For keeping oil in rotary shaft equipment while keeping out dirt, dust, water, or any other contaminants, seals are suitable. They are typically employed to safeguard the spinning shafts' bearings.
Acrylonitrile-butadiene rubber is referred to as nitrile rubber (NBR). This substance serves as a general-purpose sealing lip material and has excellent engineering qualities.
Advantages of NBR materials:
1. Outstanding Abrasion Resistance and Good Rebound Resistance
2, Good Elongation and Tensile Strength
3, Outstanding Vegetable and Animal Oil Resistance
4, Strong Resistance to Fuel and Oil
5 Excellent Water Resistance
Advantages of FKM Materials:
1. Excellent Resistance to High Temperatures
2. Excellent Resistance to Abrasion
3, Outstanding Oil Resistance
4. Outstanding Weather Resistance
5. Outstanding Ozone Resistance
6. Outstanding Water Resistance NOK-CN Factory
Oil Seal, Rotary Shaft Seal, Radial Shaft Seal, Single Lip Oil Seals, Double Lip Oil Seal, TC Type Oil Seal, SC Type Oil Seal, TB Type Oil Seal, SB Type Oil Seal, SB1 Type Oil Seal, SB2 Type Oil Seal, VC Type Oil Seal, KC Type Oil Seal, TA Type Oil Seal, SA Type Oil Seal, NBR Oil Seal, Viton Oil Seal, TEFLON Oil Seals, Stainless Steel Oil Seal, National Oil Seals, CR Oil Seals, SKF Oil Seals, NOK Oil Seals, KACO Oil Seals, GACO Oil Seals.NOK-CN Factory
TC rubber oil seal stock model
Size | TYPE | Cactgory | |||||
6*13*5 | TC11*18*5 | 14*28*8 | 20*32*8 | 20*42*10 | 22*35*6 | TC | oil seal |
6*15*5 | 12*20*4 | 14*28*10 | 20*32*10 | 20*45*7 | 22*35*7 | TC | oil seal |
6*15*6 | 12*20*5 | 14*30*7 | 20*34*7 | 20*45*8 | 22*35*7 | TC | oil seal |
8*15*5 | 12*20*6 | 14*30*8 | 20*35*6 | 20*45*10 | 22*35*8 | TC | oil seal |
TC8*16*8 | 12*22*5 | 14*30*10 | 20*35*7 | 20*47*7 | 22*35*10 | TC | oil seal |
8*16*7 | 12*22*6 | 14*35*7 | 20*35*8 | 20*47*8 | 22*36*7 | TC | oil seal |
8*20*6 | 12*22*7 | 14*35*8 | 20*35*10 | 20*47*10 | 22*36*10 | TC | oil seal |
8*22*5 | 12*22*8 | 14*35*10 | 20*36*7 | 20*48*7 | 22*37*7 | TC | oil seal |
8*22*7 | 12*24*7 | 15*24*5 | 20*36*10 | 20*50*7 | 22*38*7 | TC | oil seal |
8*22*8 | 12*25*5 | 15*24*7 | 20*37*7 | 20*50*8 | 22*38*8 | TC | oil seal |
8*25*7 | 12*25*7 | 15*25*5 | TC20*37*8 | 20*50*10 | 22*38*10 | TC | oil seal |
TC9*18*8 | 12*25*8 | 15*25*6 | 20*37*8 | 20*52*7 | 22*40*7 | TC | oil seal |
TC10*20*5 | 12*25*10 | 15*25*7 | TC20*37*8.4 | 20*52*8 | 22*40*8 | TC | oil seal |
10*20*6 | 12*28*7 | 15*25*8 | 20*37*10 | 20*52*10 | 22*40*10 | TC | oil seal |
10*20*7 | 12*32*6 | 15*26*7 | 20*38*7 | 21*32*5 | 22*42*7 | TC | oil seal |
TC10*20*8 | 12*32*7 | 15*28*7 | 20*38*8 | 21*32*7 | 22*42*8 | TC | oil seal |
10*22*5 | 12*32*10 | 15*30*5 | 20*38*10 | 21*40*7 | 22*42*10 | TC | oil seal |
10*22*6 | TC12*35*7 | 15*30*7 | 20*40*5 | 21*40*10 | 22*45*7 | TC | oil seal |
10*22*7 | TC13*22*5.5 | 15*30*8 | 20*40*6 | 22*28*4 | 22*45*8 | TC | oil seal |
10*22*8 | TC13*22*6.5 | 15*30*10 | 20*40*7 | 22*28*7 | 22*45*10 | TC | oil seal |
10*25*5 | 14*24*6 | 15*32*7 | 20*40*8 | 22*30*5 | 22*47*5 | TC | oil seal |
10*25*7 | 14*24*7 | 15*32*10 | 20*40*10 | 22*30*7 | 22*47*7 | TC | oil seal |
10*25*8 | 14*26*8 | 15*35*7 | 20*42*5 | 22*32*3 | 22*47*8 | TC | oil seal |
10*25*10 | 14*28*5 | 15*35*8 | 20*42*6 | TC22*32*5.3 | 22*47*10 | TC | oil seal |
10*30*7 | 14*28*6 | 15*35*10 | 20*42*7 | 22*32*7 | 22*48*7 | TC | oil seal |
10*30*10 | 14*28*7 | TC16*26*7 | 20*42*8 | 22*32*10 | 22*48*10 | TC | oil seal |
size | TYPE | Cactgory | |||||
25*60*7 | 27*47*7 | 28*47*12 | 35*52*12 | 35*65*8 | 37*52*7 | TC | oil seal |
25*60*10 | 27*47*10 | 28*48*7 | 35*53*5 | 35*65*10 | 37*52*8 | TC | oil seal |
25*60*12 | 27*50*10 | 28*48*8 | 35*54*8 | 35*65*12 | 37*55*7 | TC | oil seal |
25*62*7 | 27*52*5 | 28*48*10 | 35*54*10 | 35*68*8 | 37*62*7 | TC | oil seal |
25*62*8 | 27*52*7 | 28*50*7 | 35*54*12 | 35*68*10 | 37*66*10 | TC | oil seal |
25*62*10 | 27*62*10 | 28*50*8 | 35*55*7 | 35*68*12 | 37*76*10 | TC | oil seal |
25*62*12 | 28*35*5 | 28*50*10 | 35*55*8 | 35*70*7 | 37*84*10 | TC | oil seal |
26*34*4 | 28*35*7 | 28*52*7 | 35*55*10 | 35*70*8 | 38*45*10 | TC | oil seal |
26*37*7 | 28*35*10 | 28*52*8 | 35*55*12 | 35*70*10 | 38*47*7 | TC | oil seal |
26*40*10 | 28*37*7 | 28*52*10 | 35*56*5 | 35*70*12 | 38*47*10 | TC | oil seal |
26*42*7 | 28*38*7 | 28*55*7 | 35*56*8 | 35*72*7 | 38*48*7 | TC | oil seal |
26*45*10 | 28*38*8 | 28*55*8 | 35*56*10 | 35*72*8 | 38*48*8 | TC | oil seal |
26*47*7 | 28*38*10 | 28*55*10 | 35*56*12 | 35*72*10 | 38*48*9 | TC | oil seal |
26*47*10 | 28*40*5 | 28*58*7 | 35*57*7 | 35*72*12 | 38*48*10 | TC | oil seal |
26*40*7 | 28*40*7 | 28*58*10 | 35*57*9 | 35*80*8 | 38*50*7 | TC | oil seal |
26*40*10 | 28*40*8 | 28*62*10 | 35*58*7 | 35*80*10 | 38*50*8 | TC | oil seal |
26*50*10 | 28*40*10 | 29*45*10 | 35*58*8 | 35*80*12 | 38*50*10 | TC | oil seal |
TC26.9*37*4.5 | 28*42*7 | 29*50*10 | 35*58*10 | 35*85*12 | 38*50*12 | TC | oil seal |
27*38*7 | 28*42*8 | 29*62*10 | 35*58*12 | 35*90*10 | 38*52*7 | TC | oil seal |
27*38*8 | 28*42*10 | 29.6*37*4.5 | 35*60*8 | 35*90*12 | 38*52*8 | TC | oil seal |
27*38*10 | 28*45*7 | 30*40*5 | 35*60*10 | 35*92*12 | 38*52*10 | TC | oil seal |
27*40*7 | 28*45*8 | 30*40*7 | 35*60*12 | 36*46*7 | 38*52*12 | TC | oil seal |
27*40*8 | 28*45*10 | 30*40*8 | 35*62*7 | 36*48*8 | 38*54*8 | TC | oil seal |
27*40*10 | 28*47*7 | 30*40*10 | 35*62*8 | 36*52*7 | 38*54*10 | TC | oil seal |
27*43*10 | 28*47*8 | 30*40*12 | 35*62*10 | 36*52*10 | 38*54*12 | TC | oil seal |
27*45*8 | 28*47*10 | 30*42*5 | 35*62*12 | 37*50*10 | 38*55*7 | TC | oil seal |
size | TYPE | Cactgory | |||||
40*68*8 | 42*50*7 | 42*62*12 | 48*60*10 | 48*82*10 | 50*70*16 | TC | oil seal |
40*68*10 | 42*50*8 | 42*65*7 | 48*60*12 | 48*82*12 | 50*72*5 | TC | oil seal |
40*68*12 | 42*50*10 | 42*65*8 | 48*62*7 | 48*85*10 | 50*72*7 | TC | oil seal |
40*70*7 | 42*52*7 | 42*65*10 | 48*62*8 | 48*85*12 | 50*72*8 | TC | oil seal |
40*70*8 | 42*52*8 | 42*65*12 | 48*62*10 | 48*90*12 | 50*72*9 | TC | oil seal |
40*70*10 | 42*52*10 | 42*68*8 | 48*62*12 | 48*100*8 | 50*72*10 | TC | oil seal |
40*70*12 | 42*53*7 | 42*68*10 | 48*65*8 | 48*100*10 | 50*72*12 | TC | oil seal |
40*72*7 | 42*55*6 | 42*68*12 | 48*65*10 | 50*60*8 | 50*75*7 | TC | oil seal |
40*72*8 | 42*55*7 | 42*70*8 | 48*65*12 | 50*60*10 | 50*75*8 | TC | oil seal |
40*72*10 | 42*55*8 | 42*70*10 | 48*68*8 | 50*60*12 | 50*75*9 | TC | oil seal |
40*72*12 | 42*55*10 | 42*70*12 | 48*68*10 | 50*62*7 | 50*75*10 | TC | oil seal |
40*75*8 | 42*56*5 | 42*75*8 | 48*68*12 | 50*62*8 | 50*75*12 | TC | oil seal |
40*75*10 | 42*56*7 | 42*75*10 | 48*70*7 | 50*62*10 | 50*78*8 | TC | oil seal |
40*75*12 | 42*56*8 | 42*75*12 | 48*70*8 | 50*62*12 | 50*78*10 | TC | oil seal |
40*78*7 | 42*56*10 | 42*80*8 | 48*70*10 | 50*63*7 | 50*78*12 | TC | oil seal |
40*80*7 | 42*58*7 | 42*80*10 | 48*70*12 | 50*65*8 | 50*80*7 | TC | oil seal |
40*80*8 | 42*58*8 | 42*80*12 | 48*72*8 | 50*65*10 | 50*80*8 | TC | oil seal |
40*80*10 | 42*58*10 | 42*85*10 | 48*72*10 | 50*65*12 | 50*80*10 | TC | oil seal |
40*80*12 | 42*58*12 | 43*55*7 | 48*72*12 | 50*68*8 | 50*80*12 | TC | oil seal |
40*85*10 | 42*60*8 | 43*63*9 | 48*75*8 | 50*68*9 | 50*80*13 | TC | oil seal |
40*85*12 | 42*60*9 | 44*55*7 | 48*75*10 | 50*68*10 | 50*82*8 | TC | oil seal |
40*90*8 | 42*60*10 | 44*55*8 | 48*75*12 | 50*68*12 | 50*82*10 | TC | oil seal |
40*90*10 | 42*60*12 | 44*55*10 | 48*78*10 | 50*70*5 | 50*82*12 | TC | oil seal |
40*90*12 | 42*62*7 | 44*56*10 | 48*80*8 | 50*70*8 | 50*85*8 | TC | oil seal |
40*92*12 | 42*62*8 | 44*56*11 | 48*80*10 | 50*70*10 | 50*85*10 | TC | oil seal |
41*53*11 | 42*62*10 | 44*60*7 | 48*80*12 | 50*70*12 | 50*85*12 | TC | oil seal |
size | size | size | size | size | size | TC | oil seal |
70*92*10 | 72*100*10 | 75*140*12 | 170*190*12 | 190*225*14 | 220*240*12 | TC | oil seal |
70*92*12 | 72*100*12 | 78*100*10 | 170*190*15 | 190*225*16 | 220*250*12 | TC | oil seal |
70*95*8 | 72*140*12 | 78*100*12 | 170*200*12 | 190*225*18 | 220*250*15 | TC | oil seal |
70*95*10 | 75*85*8 | 80*95*8 | 170*200*15 | 190*230*15 | 220*250*16 | TC | oil seal |
70*95*12 | 75*85*10 | 80*95*10 | 170*200*16 | 190*230*18 | 220*250*18 | TC | oil seal |
70*95*13 | 75*90*8 | 80*95*12 | 170*210*15 | 190*240*18 | 220*255*16 | TC | oil seal |
70*95*15 | 75*90*10 | 80*100*8 | 170*215*15 | 195*220*15 | 220*255*18 | TC | oil seal |
70*100*10 | 75*90*12 | 80*100*10 | 170*220*16 | 195*225*16 | 220*260*16 | TC | oil seal |
70*100*12 | 75*95*8 | 80*100*12 | 175*200*15 | 195*230*15 | 220*260*18 | TC | oil seal |
70*105*10 | 75*95*10 | 80*105*8 | 180*200*15 | 200*220*12 | 225*250*15 | TC | oil seal |
70*105*12 | 75*95*12 | 80*105*10 | 180*210*12 | 200*230*13 | 230*260*15 | TC | oil seal |
70*110*10 | 75*100*8 | 80*105*12 | 180*210*15 | 200*230*15 | 230*260*18 | TC | oil seal |
70*110*12 | 75*100*10 | 80*105*13 | 180*210*16 | 200*230*18 | 230*265*18 | TC | oil seal |
70*115*10 | 75*100*12 | 80*110*8 | 180*210*18 | 200*235*15 | 230*270*15 | TC | oil seal |
70*115*12 | 75*102*10 | 80*110*10 | 180*215*15 | 200*235*18 | 235*255*12 | TC | oil seal |
70*120*10 | 75*102*12 | 80*110*12 | 180*215*16 | 200*240*15 | 235*265*15 | TC | oil seal |
70*120*12 | 75*105*10.5 | 80*110*13 | 180*215*18 | 200*240*18 | 240*270*15 | TC | oil seal |
70*125*12 | 75*105*12 | 80*113*12 | 180*220*12 | 200*250*15 | 240*270*16 | TC | oil seal |
70*130*12 | 75*110*10 | 80*115*10 | 180*220*15 | 200*250*16 | 240*270*18 | TC | oil seal |
70*140*12 | 75*110*12 | 80*115*12 | 180*220*18 | 200*250*18 | 240*280*15 | TC | oil seal |
72*90*8 | 75*115*10 | 80*115*13 | 180*225*15 | 210*240*15 | 240*280*18 | TC | oil seal |
72*90*10 | 75*115*12 | 80*120*10 | 185*210*15 | 210*245*16 | 240*300*18 | TC | oil seal |
72*90*12 | 75*120*10 | 80*120*12 | 185*220*15 | 210*245*18 | 250*280*15 | TC | oil seal |
72*95*8 | 75*120*12 | 80*120*13 | 185*230*15 | 210*250*15 | 250*280*18 | TC | oil seal |
72*95*10 | 75*125*12 | 80*125*10 | 190*220*12 | 210*250*18 | 250*285*18 | TC | oil seal |
72*95*12 | 75*130*12 | 80*125*12 | 190*220*15 | 215*250*15 | 250*285*20 | TC | oil seal |
TC Type
Rubber covered OD to increase the OD sealing capability.
Suitable for soft alloy, plastic, steel or cast iron housing materials.
The temperature range is depending on the material.
!!! - HAZARDOUS FUMES
Safety precautions for fluoro rubber and Polytetrafluoroethylene
Fluoro rubber (FKM) and Polytetrafluoroethylene (PTFE) are very stable and harmless up to normal operating temperatures of 200 °C (390 °F). However, if exposed to temperatures above 300 °C (570 °F), such as fire or the open flame of a cutting torch, FKM and PTFE give off hazardous fumes. These fumes can be harmful if inhaled, as well as if they contact the eyes. In addition, once the seals have been heated to such temperatures, they are dangerous to handle even after they have cooled. Therefore, they should never come in contact with the skin.
If it is necessary to handle bearings with seals that have been subjected to high temperatures, such as when dismounting the bearing, the following safety precautions should be observed:
Always wear protective goggles, gloves and appropriate breathing apparatus.
Place all off the remains of the seals in an airtight plastic container marked with a symbol for “material will etch”.
Follow the safety precautions in the appropriate material safety data sheet (MSDS).
If there is contact with the seals, wash hands with soap and plenty of water and, if contact has been made with the eyes, flush eyes with plenty of water and consult a doctor immediately. If the fumes have been inhaled, consult a doctor immediately.
The user is responsible for the correct use of the product during its service life and its proper disposal. NNK takes no responsibility for the improper handling of FKM or PTFE, or for any injury resulting from their use.
View More
Why Do Cars Use Water Plugs And How to Use Water Plugs?
Apr. 27, 2023Let's Discover How Motorcycle Oil Seals Work
Feb. 16, 2023