145*175*13/14 Rear Wheel Repair Kit For Benz

The Wheel Hub Oil Seal

High-quality, easy-to-install NNK Seals meet or exceed original equipment specifications with high quality materials and application-specific designs. The complex rubber blend is made to resist extreme temperatures with good elastic recovery, high abrasion resistance, and has a broad fluid compatibility.

• NNK Seals are designed to meet or exceed the original OEM specification to provide longer sealing life
• NNK Seals are constructed to provide superior protection from water, dirt, and other contaminants from entering the seal while preventing the application fluid from leaking out
• NNK Seals are made from the highest quality steel and rubber materials to ensure maximum performance under the most extreme conditions in every demanding application
• NNK Seals are designed to match the OEM configuration to ensure superior quality and ease of installation
• Sealing materials are specifically engineered for the application fluid type and temperature range

The main function of the hub oil seal is to seal the lubricating oil inside the hub. Its main function has two points: first, through the main seal lip of the oil seal, it can effectively prevent the leakage of lubricating oil and ensure that the bearing maintains a good lubrication state; Secondly, it can also avoid the pollution of the lubricant to the brake pads and brake drums, thereby reducing the decline in brake performance or possible failure.

Truck oil seals:

Truck oil seals are a type of sealing device that are used in various trucks, buses, and other heavy-duty vehicles. These seals are designed to prevent the leakage of oil and other fluids from the engine and other vital components of the vehicle.

Function:

The function of a truck oil seal is to provide a tight and secure seal between two parts of the engine or other components that may contain oil or other fluids. These seals are typically made from rubber or other elastomeric materials that can withstand high temperatures and pressures. They are also designed to withstand friction, wear, and other forms of mechanical stress.

The primary benefits of truck oil seals include their ability to prevent oil leakage, reduce friction and wear, and increase the lifespan of critical engine parts. In addition, these seals can help improve fuel efficiency by reducing the amount of oil that is lost or wasted due to leakage.

Features:
One of the primary features of truck oil seals is their ability to withstand extreme temperatures and pressures. Most seals are made from materials that can withstand temperatures ranging from -40°C to 200°C, and pressures up to 10 bar.
Another important feature of these seals is their ability to resist abrasion, corrosion, and other forms of mechanical stress. This makes them ideal for use in heavy-duty environments where the seal must withstand constant use and exposure to the elements.

NNK oil seal factory

1、For the factory
We are an honest oil seal supplier.We have very good expertise, experienced technicians, new good equipment, strict inspection procedures, durability and performance seal testing, PPAP level IIl submission. Strict process control, international standard high-quality products and affordable prices. The strength factory has more than 150 workers, strong delivery capacity, we provide you with the best after-sales service.

2、For products
NNK is committed to the best raw materials, and uses advanced technology and equipment to solve oil seal problems for customers.Our products not only ensure the sealing effect, but also minimize the friction force. The service life is longer than the average service life of oil seals. less loss.

3、About production
A: Existing molds: 30 days, depending on ordering quantity.
New Molds: 60 days, depending on ordering quantity.
Samples Submission :21-28 days with existing toolings.
We are NNK brand under NOK-CN, accept ODM and OEM. We have the ability to provide samples of disassembled products, develop molds,and carry out production

FAQ
1.What is your packing?
a. Paper roller: 10pcs in one roller, 200 rollers in one carton b. PP bag: 50 or 100pcs in one bag,15 or 30 bags in one carton
C.Box:1pctoabox
d. According to customer's request. 

2.Date of Delivery 
a. 1-2 days if goods in stock.
b. 10-15 days if goods out of stock with molding. 
c.25-30 days if goods out of stock without molding. 

3.Payment Term:
a. 30% T/T in advance and 70% balance paid before shipment. 
b. West union/Money Gram 
C.Paypal
d.others for discussion

4.Can you produce according to the samples?
a. We accept ODM and OEM at the same time.We have the ability to provide the sample of the products of decomposition, develop the mould, for production. 

5. How do you make our business long-term and good relationship?
a. We will continue to improve the process control, and improve the quality of our products and work to reduce operating costs and provide a competitive price for customers, to ensure that customers benefit
b. We seriously treat every customer, in good faith with them to do business, make friends, no matter how much volume, we will provide